Mailbase Speed Connection Support

Mailcoms Mailbase Speed · Connection

How to connect the Mailcoms Mailbase Speed – rebooting a comms device or dongle, setting up and configuring PC Meter Connect, and fixing DE connection errors.

How do I reboot a comms device with no internet on the Mailbase Speed?

Remove the power cable from the device.
Once the lights go out, reinsert the power cable.
Wait for the green light to appear.
Try to reconnect the machine.

How do I reboot a dongle with no internet on the Mailbase Speed?

Remove the power cable from the back of the machine.
Remove the USB adapter (dongle) from the back of the machine.
Check the LAN cable and the USB on the dongle are secure.
Plug the dongle back into either USB socket on the back of the machine.
Plug the power lead back in and let the machine initialise.
Check the dongle lights – a static 100 light and a flashing ACT light.
Try connecting the machine again.

How do I connect via PC Meter Connect on the Mailbase Speed?

PC Meter Connect lets the machine connect through a Windows PC and USB instead of a phone line. The PC needs Windows (2000 to 7, 32 or 64-bit; Mac and Linux are not supported), a 1.2GHz processor, 512MB RAM, a USB port, admin rights, Microsoft .NET 2.0 and an internet connection.

Download and run the PC Meter Connect installer from our PC Meter Connect support page.
Choose your language and follow the on-screen steps to install.
Connect the machine to the PC by USB and open PC Meter Connect.

How do I check my PC Meter Connect configuration on the Mailbase Speed?

Make sure you have the latest version of PC Meter Connect installed and connected to the machine.
Right-click the PC Meter Connect icon in the system tray (bottom right) and select Internet Settings.
Select Non-Chunked as the HTTP Transfer Encoding Method.
Select HTTP or HTTPS as the Protocol (if greyed out, select Passive FTP Mode).

Note: To check your internet is working, open dev.mailcoms.co.uk on the PC. If a connection fails immediately but websites load, it is likely a firewall problem.

How do I fix DE errors, Connection Lost or proxy-only mode on the Mailbase Speed?

DE00 / DE01 / DE04 / DE014 / DE015: connect in the morning when the server is quieter, reboot the machine and PC, then in PC Meter Connect Internet Settings change Non-Chunked to Chunked and Passive FTP to Active. Reinstall PC Meter Connect if it still fails.
Connection Lost: a server-side issue – keep trying.
PC Meter Connect running in proxy-only mode: follow the same Chunked / Active FTP steps as the DE errors.

Mailbase Speed Connection – Frequently Asked Questions

Why won’t my Mailbase Speed connect to the Data Centre?

Most failures are network related. Reboot the comms device or dongle, check the cables and try again, or connect via PC Meter Connect.

What do I do about a DE error on the Mailbase Speed?

Connect at a quieter time, reboot the machine and PC, and in PC Meter Connect switch Non-Chunked to Chunked and Passive FTP to Active.

What does Connection Lost mean on the Mailbase Speed?

It is a temporary issue with the postage servers. Keep trying, and contact us if it persists.

Still having connection problems with your Mailbase Speed?

Our technical team are Royal Mail Authorised Inspectors and fully qualified franking machine engineers. Call us on 01543 572 776 – Mon–Fri 8:30 to 17:00.